diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c
index 155677e..15926c4 100644
--- a/drivers/usb/host/ehci-exynos.c
+++ b/drivers/usb/host/ehci-exynos.c
@@ -16,6 +16,7 @@
 #include <asm/arch/ehci.h>
 #include <asm/arch/system.h>
 #include <asm/arch/power.h>
+#include <asm/gpio.h>
 #include <asm-generic/errno.h>
 #include <linux/compat.h>
 #include "ehci.h"
@@ -30,6 +31,7 @@
 struct exynos_ehci {
 	struct exynos_usb_phy *usb;
 	struct ehci_hccr *hcd;
+	struct fdt_gpio_state vbus_gpio;
 };
 
 static struct exynos_ehci exynos;
@@ -58,6 +60,9 @@
 
 	exynos->hcd = (struct ehci_hccr *)addr;
 
+	/* Vbus gpio */
+	fdtdec_decode_gpio(blob, node, "samsung,vbus-gpio", &exynos->vbus_gpio);
+
 	depth = 0;
 	node = fdtdec_next_compatible_subnode(blob, node,
 					COMPAT_SAMSUNG_EXYNOS_USB_PHY, &depth);
@@ -150,6 +155,12 @@
 	ctx->hcd = (struct ehci_hccr *)samsung_get_base_usb_ehci();
 #endif
 
+#ifdef CONFIG_OF_CONTROL
+	/* setup the Vbus gpio here */
+	if (!fdtdec_setup_gpio(&ctx->vbus_gpio))
+		gpio_direction_output(ctx->vbus_gpio.gpio, 1);
+#endif
+
 	setup_usb_phy(ctx->usb);
 
 	*hccr = ctx->hcd;
diff --git a/drivers/usb/host/xhci-exynos5.c b/drivers/usb/host/xhci-exynos5.c
index eb0ef6c..1146d10 100644
--- a/drivers/usb/host/xhci-exynos5.c
+++ b/drivers/usb/host/xhci-exynos5.c
@@ -22,6 +22,7 @@
 #include <asm/arch/cpu.h>
 #include <asm/arch/power.h>
 #include <asm/arch/xhci-exynos.h>
+#include <asm/gpio.h>
 #include <asm-generic/errno.h>
 #include <linux/compat.h>
 #include <linux/usb/dwc3.h>
@@ -39,6 +40,7 @@
 	struct exynos_usb3_phy *usb3_phy;
 	struct xhci_hccr *hcd;
 	struct dwc3 *dwc3_reg;
+	struct fdt_gpio_state vbus_gpio;
 };
 
 static struct exynos_xhci exynos;
@@ -66,6 +68,9 @@
 	}
 	exynos->hcd = (struct xhci_hccr *)addr;
 
+	/* Vbus gpio */
+	fdtdec_decode_gpio(blob, node, "samsung,vbus-gpio", &exynos->vbus_gpio);
+
 	depth = 0;
 	node = fdtdec_next_compatible_subnode(blob, node,
 				COMPAT_SAMSUNG_EXYNOS5_USB3_PHY, &depth);
@@ -291,6 +296,12 @@
 
 	ctx->dwc3_reg = (struct dwc3 *)((char *)(ctx->hcd) + DWC3_REG_OFFSET);
 
+#ifdef CONFIG_OF_CONTROL
+	/* setup the Vbus gpio here */
+	if (!fdtdec_setup_gpio(&ctx->vbus_gpio))
+		gpio_direction_output(ctx->vbus_gpio.gpio, 1);
+#endif
+
 	ret = exynos_xhci_core_init(ctx);
 	if (ret) {
 		puts("XHCI: failed to initialize controller\n");